PROCOM Directional Antennas


YA models
Light-weight and low-cost Yagi antenna with incorporated mounting clamp for pipe with a diameter of 30 -50 mm. Available for 900 MHz, 1800 MHz and 2100 MHz

R models
Professional Yagi antennas manufactured from high quality aluminium alloys incorporating a balanced balun ensuring a wide bandwidth and perfect impedance matching, and a RG314 feeder with N connector and mounting clamp. Available in models with 2  to 18 elements with gain up to 18 dBd. Available frequencies from 66 MHz to 900 MHz

DP models
Centre-fed folded Dipole antenna, incorporating a balanced balun ensuring a wide bandwidth and perfect impedance matching, and a RG314 feeder with N connector and mounting clamp. The dipole element, supporting boom and the adjoining metal castings have been constructed in high quality aluminium alloys to prevent corrosion. All metal parts are DC-grounded. Available in models from 66 MHz to 500 MHz

TSR models
The crossed-dipole turnstile antenna with reflector is ideal for Hemispherical coverage , as it receives right hand circular polarisation when the satellite is directly overhead, and has an omnidirectional, horizontally polarized pattern for signals arriving parallel to the ground. The reflector shields the crossed-dipole element from ground reflections which otherwise may cause the signal to disappear into the noise due to cancelling effects. Enhancing the dipole-to-reflector spacing from ideally 0.4 λ to 0.45 λ increases the strength of signals received at low angles. Consequently, a constant signal throughout the pass with virtually no fading is ensured.
Available in the frequency bands of 140 to 200 MHz and  136 to 138 MHZ

Copyright© 2010 Rotronix (AU) Ltd. PTY. All Rights Reserved.